A fire hydrant is an active fire protection measure, and a source Of water provided in most urban, suburban and rural areas with municipal water service to enable firefighters to tap into the municipal water supply to assist in extinguishing a fire. It works effectively in improving the firefighting capacity of a place where it is installed. Apart from firefighting purpose, these hydrated systems are also used in several other applications such as water transfer, irrigation

Such systems fight with the fire using well designed water distribution system that includes water tank and fire pumps. It also has distributed piping system which is connected all over the building using the pipes, nozzles and hydrants. The main purpose of using fire hydrant system is to give best possible source of water to each corner of the building. It helps in protecting the building by simply making control on fire during an emergency.

Under normal conditions the sprinkler head is closed off by a liquid filled bulb. If due to the effects of a fire, the ambient temperature in the immediate vicinity rises by approximately 30 oc above the maximum temperature expected under normal conditions, the glass bulb bursts. The pressurized extinguishing water then flows through the piping into the sprinkler head and the resulting water jet hits the spray plate which diverts the spray to the areas to be covered. At the same time the water flow in the piping network trips the alarm systems. When the fire is extinguished, you replace the sprinkler that was activated and the system is ready for operation again.

The different types of systems, such as wet or dry systems or pre-controlled dry systems, are adapted to meet specific criteria, for instance places prone to frost or special risk areas.

The purpose of having safety signage in the workplace or residential area is to identify and warn workers or peoples who may be exposed to hazards in the workplace or residential areas. Safety signs can assist in the communication of important instructions, reinforce safety messages and provide instruction for emergency situations.

Safety signs are vitally important to remind employees/ peoples to be careful and remain alert at all times to any potential hazards that exist at the workplace or residential areas. Activate Win

Swipefire has developed the expertise to undertake all types Of projects for the provision and installation of fire suppression systems as specialist providers. From kitchen fire suppression systems to server room fire suppression, we design and install systems to the requirements specified by our clients.

Our Fire Suppression capability covers a wide range of systems, including: • Water • Water mist • Foam • Foam mist • Dry chemical • C02 • Argon • Tube technology

The discharge and distribution of water is uniform in high-velocity water curtain systems or otherwise known as sprayers. These nozzles are usually connected to water, air or pressurized nitrogen sources through which a deluge valve is opened which fire detection systems raise an alarm. Nozzles are usually mounted in the horizontal position facing opposite to the ground and these nozzles which are used in high-velocity water spray systems are also called projectors.